| | | Engine tuning by Rikkaddy | |
| | Author | Message |
|---|
Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:49 | |
| When we pop the hoods of our cars, we only have one thing in mind-more power. No matter how slow you might think your engine is, it's always capable of pumping out some serious ponies. For us enthusiasts, horsepower is an addiction more powerful than crack. One upgrade will keep you good for a little while, but at some point you're going to need more (and more). Intakes and exhaust only feel fast for so long. You'll need to dip into the top end and get some cams, maybe slap on a big turbo and port and polish your head. But you gotta do it the right way or you might end up wasting your hard-earned money-like buying bunk crack-and we don't want that. We hit up some of the top manufacturers and tuners to see what recipes they'd put together to make gains of 25, 50, 75 and 100 percent over your stock motor. If that's not enough, there are dudes like the Turbo Twins who tend to go a bit overboard. Still not fast enough for you? Then go buy a jet, homie. Honda/Acura Recipe For Power Engine K20 Stock Horsepower 200hp Chef Skunk2 Racing 951.808.9888 www.skunk2.com+25 percent (250hp) Mix In * ECU (Skunk2, Hondata) * Header (Skunk2) * Mega Power exhaust (Skunk2) * Stage 1 camshafts (Skunk2) +50 percent (300hp) Preserve ECU, header, exhaust Mix In * Stage 2 camshafts (Skunk2) * Intake tube * Higher compression * Cam gear (Skunk2 * Intake manifold (Skunk2) * Fuel rail (Skunk2) +75 percent (350hp) Preserve ECU, header, exhaust, intake tube, higher compression, cam gear, intake manifold, fuel rail Mix In * Stage 3 camshafts (Skunk2) * Ported and polished head (Skunk2)* Valvesprings and retainers (Skunk2) * Valves (Skunk2) * Stroker kit (Skunk2) +100 percent (400hp) Preserve ECU, header, exhaust, intake, higher compression, cam gear, intake manifold, fuel rail, camshafts, ported and polished head, valvesprings and retainers, valves, stroker kit Mix In * Dry sump * Maximum compression*Another option is a bolt-on or custom turbo kit. Chef Hasport 602.470.0065 www.hasport.com+25 percent (250hp) Mix In * Header (DC Sports) * Air intake (AEM) * Exhaust (DC Sports) * Stage 1 camshafts (Skunk2, IPS) * ECU upgrade (Hondata K-Pro) +50 percent (300hp) Preserve air intake, ECU Mix In * Header (Hytech)* Custom exhaust * Stage 3 camshafts (Skunk2, IPS)* Valvesprings (Skunk2, Eibach) * Valve spring retainers (Skunk2) * Higher compression pistons (JE, Arias) * Ported and polished head (Head Games) * Throttle body (BDL, Skunk2) * 650cc injectors (RC Engineering) +75 percent (350hp) Preserve intake, ECU, valvesprings, retainers, ported and polished head, injectors, exhaust Mix in * Supercharger (Jackson Racing) * High boost pulley (Jackson Racing) * Supercharged camshafts (Jackson Racing) * Higher compression pistons (JE, Arias) * Connecting rods * 4-1 header (Hytech) or * GT28RS through GT30 turbo * Turbo manifold cast log-style * 3-bar MAP sensor +100 percent (400hp) Preserve intake, ECU, valvesprings, retainers, ported and polished head, exhaust, MAP sensor Mix in * GT30 or larger turbo kit * 750cc injectors (RC Engineering) * 255lph high-flow fuel pump * Turbo cams * Forged pistons * Forged or billet connecting rods * Sleeved block * Boost controller |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:50 | |
| Chef Raceline Development 626.292.7030 www.racelinedevelopment.com+25 percent (212hp) Mix In * Header (DC Sports, GReddy, Toda) * Straight-through exhaust (HKS, GReddy, A'PEXi, Tanabe)* Air intake (AEM, Fujita Air) * Mild camshafts (Skunk2, Buddy Club, Toda) *don't forget the cam sprockets* Some type of chipped ECU or fuel controller * Stock injectors are sufficient at this power level +50 percent (255hp) Preserve header, exhaust, intake Mix In * More aggressive cams (Toda, Skunk2) * Valvesprings and retainers (Buddy Club, Toda Racing, Skunk2, Supertech) * Intake manifold and larger throttle body (Edelbrock, Skunk2) * 11.0:1 and 12.0:1 high-compression pistons (Japanese spec Integra Type R, Arias, CP, JE) * 310cc or 370cc injectors (RC Engineering) * Adjustable fuel pressure regulator (B&M, AEM) * Engine management will keep your engine safe and allow you to raise the rev limit (AEM, A'PEXi, Hondata) +75 percent (297hp) Preserve valvetrain, fuel pressure regulator, engine management Mix In * Race spec cams (Toda, Skunk2) * Custom racing header * Velocity stack, individual throttle bodies, or custom intake manifold* Ported and polished head* 13.0:1 and 14.0:1 high compression pistons * 440cc injectors * 190lph or 255lbh high-flow fuel pump * Stand alone engine management (MoTeC, Autronic, Pectel, HKS) *Another option is a bolt-on turbo kit (GReddy, Edelbrock) +100 percent (340hp) Preserve valvetrain, fuel pump, fuel pressure regulator, engine management Mix In * Exhaust manifold (Full Race, Drag, Inline Pro, Rev Hard) * Turbo-the smallest being a T3/TO4E 50trim * GReddy Type 24 intercooler or similar size* 70mm custom exhaust system * 550cc injectors Note: Raceline states this is the limit of a street car, so if you want more power than this you might be spending more money than you'd like. Chef Blox Racing 510.440.1605 www.bloxracing.com+25 percent (212hp) Mix In * Stage 1 racing camshafts (BLOX Racing) * Racing adjustable cam gears (BLOX Racing) * Racing dual Valvesprings and titanium retainers (BLOX Racing) * Racing performance intake manifold (BLOX Racing) * 4-2-1 header * 2.5-inch after-cat exhaust * 3-inch air intake * ECU tuning (Crome Pro) +50 percent (255hp) Preserve cam gears, valvesprings and retainers, intake manifold, header, exhaust, intake, ECU Mix In * Stage 2 racing or HSL camshafts (BLOX Racing) * Valves (BLOX Racing) * Port-matched intake manifold (BLOX Racing) * 68mm racing throttle body (BLOX Racing) * Racing fuel pressure regulator (BLOX Racing) * Racing gauge adapter kit (BLOX Racing) * Billet engine guard (BLOX Racing) * Ported and polished head * Integra Type R pistons * 310cc injectors +75 percent (297hp) Preserve cam gears, valvesprings and retainers, intake manifold, exhaust, intake, ECU, valves, port-matched intake manifold, fuel pressure regulator, gauge adapter kit, engine guard Mix in * Stage 3 racing or HSL camshafts (BLOX Racing) * 70mm racing throttle body (BLOX Racing) *Machine-ported intake manifold runners (BLOX Racing) * Competition ported and polished head * 11.5:1 to 12.5:1 high-compression pistons * 440cc injectors * Sleeved engine block bored to 84mm * Open header exhaust +100 percent (340hp) Preserve cam gears, valvesprings and retainers, intake manifold, exhaust, ntake, ECU, valves, port-matched intake manifold, fuel pressure regulator, gauge adapter kit, engine guard, ported and polished head, larger injectors Mix in * Stage 1 racing camshafts (BLOX Racing) * 68mm racing throttle body (BLOX Racing) * Bolt-on or custom turbo kit with intercooler (BLOX Racing) * Boost controller |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:51 | |
| Engine SR2ODET Stock Horsepower 205hp Chef G-Dimension 626.839.3777 www.g-dimension.com+25 percent (256hp) Mix In * Air intake (Top Fuel)* 3-inch exhaust piping (Circuit Sports, Design Motorsports Engineering)* Downpipe (Circuit Sports, Design Motorsports Engineering) * Turbo elbow (GReddy, Tomei, Megan Racing) * 8 psi adjustable actuator wastegate (HKS)* Adjustable fuel pressure regulator (Nismo, Sard, HKS)* Boost controller +50 percent (307hp) Preserve filter, exhaust, downpipe, turbo elbow, actuator wastegate, fuel pressure regulator Mix In * Type M intercooler (GReddy) * Fuel pump (Tomei, Nissan Z32, Walbro) * Electronic boost controller (HKS, GReddy) * Power FC, F-CON V Pro, EMS engine management e-Manage (GReddy, AEM, HKS, A'PEXi) * 550cc injectors * 264-degree duration camshafts (Tomei, Brian Crower, Toda, HKS) * Turbo upgrade S15 factory (Nissan) * Pivot bolt (Nismo) +75 percent (358hp) Preserve filter, exhaust, downpipe, turbo elbow, actuator wastegate, fuel pressure regulator, intercooler, fuel pump, boost controller, engine management, camshafts, pivot bolt Mix In * 740cc injectors * 1.2mm head gasket (A'PEXi, HKS, GReddy) * Valvesprings and retainers (Tomei, Brian Crower, Toda, HKS) * Rocker arm stoppers (Circuit Sports) * Exhaust manifold (Tomei, Design Motorsports Engineering) * Oil Pan (GReddy, Tomei) * GT2835 turbo upgrade(HKS) * Upgraded belts (Power Enterprise) * 70mm throttle body (Tomei) * Clutch twin-plate (Exedy) * MAF sensor Z32 (Nissan) +100 percent (410hp) Preserve filter, exhaust, downpipe, turbo elbow, fuel pressure regulator, intercooler, fuel pump, boost controller, engine management, camshafts, pivot bolt, head gasket, MAF sensor, belts, valvesprings and retainers, throttle body, oil pan Mix In * Racing camshafts * 850cc injectors * External wastegate (HKS, TiaL) *Intake manifold (GReddy) * Clutch slave cylinder (Nismo) * 272-degree duration camshafts (HKS, Tomei) * Solid lifters (HKS, Tomei) * Stroker kit (HKS, Tomei) * GT2871 or larger turbo upgrade (HKS) * Custom exhaust manifold (G-Dimension) * Clutch triple-plate (Exedy, OS Giken) Chef Kure International 626.839.3511 www.kure-international.com+25 percent (256hp) Mix In * Camshafts (Poncam) * 256-degree duration intake and exhaust with 11.5mm lift (Tomei) * Reytec upgraded ECU (Tomei) * Boost controller +50 percent (307hp) Preserve cams, boost controller, ECU Mix In * 555cc injectors (Tomei) * High-flow fuel pump (Tomei) * Z32 MAFS * Upgraded turbo +75 percent (358hp) Preserve cams, boost controller, injectors, MAFS, fuel pump, ECU Mix In * ARMS B7652 turbo upgrade (Tomei) * 1.2mm metal head gasket (Tomei) * Rocker arm stoppers (Tomei) * Expreme turbo manifold (Tomei) * Expreme turbo elbow (Tomei) +100 percent (410hp) Preserve cams, boost controller, injectors, MAFS, fuel pump, turbo upgrade, rocker arm stoppers, turbo manifold, elbow, head gasket, ECU Mix In * 740cc injectors (Tomei) * Higher boost levels |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:52 | |
| Engine VQ35DE Stock Horsepower 270hp Chef Greddy 949.588.8300 www.greddy.com+25 percent (337hp) Mix In * EVO2 after-cat exhaust (GReddy) * Airinx intake (GReddy) * EASY camshafts (GReddy) * V-Manage electronic valve timing controller (GReddy)*Another option is a bolt-on twin-turbo TD05H-18G kit with e-Manage Ultimate and injectors (GReddy). +50 percent (405hp) Mix In * EVOTT exhaust (GReddy) * Twin-turbo TD05H-18G kit (GReddy) * Type-23 intercooler (GReddy) * Upgraded fuel pump (GReddy) * PRofec boost controller (GReddy) * Retune e-Manage Ultimate (GReddy) +75 percent (472hp) Preserve exhaust, turbo kit, intercooler, fuel pump, e-Manage Ultimate, boost controller Mix In * V-Manage electronic valve timing controller (GReddy) * Thicker metal head gasket (GReddy) * Forged pistons * Forged connecting rods +100 percent (540hp) Preserve exhaust, turbo kit, intercooler, fuel pump, e-Manage Ultimate, boost controller, valve timing controller, head gasket, forged pistons, forged connecting rods Mix In * Easy camshafts (GReddy) Chef Tuning Concepts 512.791.4012 www.tuningconcepts.com+25 percent (337hp) Mix In * F-CON V Pro engine management tuning (HKS, Tuning Concepts) * Naturally aspirated mild camshafts * Hi-Power exhaust (HKS) * Suction Power intake (HKS) * Intake spacer +50 percent (405hp) Preserve engine management and tuning, exhaust, intake, intake spacer Mix In * Naturally aspirated high lift camshafts * Ported and polished head (Tuning Concepts) * Valve guides (Tuning Concepts) * Valvesprings (Tuning Concepts) * 11.5:1 forged pistons (HKS) * Connecting rods (HKS) * Fuel system (Boost Logic) +75 percent (472hp) Preserve engine management and tuning, exhaust, intake spacer, ported and polished head, valve guides, valvesprings, fuel system Mix In * Turbo camshafts * Ignition upgrade (HKS) * Turbo kit (Boost Logic) +100 percent (540hp) Preserve engine management and tuning, intake spacer, ported and polished head, valve guides, valvesprings, fuel system, turbo camshafts, ignition, turbo kit Mix In * Custom exhaust (Boost Logic) * 9.0:1 forged pistons (HKS, Brian Crower) * Connecting rods or stroker kit (HKS, Brian Crower) |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:52 | |
| Mazda Recipe For Power Engine 13B-REW Stock Horsepower 255hp Chef Speed Machine Performance 760.727.8700 www.speedmachineperformance.com+25 percent (318hp) Mix In * High flow fuel pump (Walbro, GT-R) * After-cat exhaust (Racing Beat, HKS, GReddy, JIC) * Air filter (K&N, A'PEXi, Racing Beat) +50 percent (382hp) Preserve fuel pump, exhaust, filter Mix In * Power FC or E6X ECU upgrade with harness (A'PEXi, Haltec, Speed Machine) * Boost controller (A'PEXi, Haltec) * Downpipe (HKS) * Mid-pipe (Racing Beat, HKS, GReddy, JIC) +75 percent (446hp) Preserve exhaust, filter, ECU, boost controller, downpipe, mid-pipe Mix In * 255lph fuel pump (Walbro) * 1,200cc-1,600cc secondary injectors * Fuel rail (Speed Machine) * Rising rate fuel pressure regulator (SARD, Aeromotive) * Upgraded twin-turbo or single GT35R turbo * Tubular exhaust manifold (Speed Machine) * 38mm wastegate (Turbosmart) * Front-mount intercooler (HKS)* Full exhaust (HKS) +100 percent (510hp) Preserve exhaust, filter, ECU, boost controller, downpipe, mid-pipe, fuel pump, secondary injectors, fuel rail, fuel pressure regulator, twin-turbo or single-turbo, manifold, intercooler Mix In * 1,000cc primary injectors * Surge tank (HKS) * 48mm wastegate (Turbosmart) * V-mount intercooler and radiator (Speed Machine) Chef NepTune Speed 714.842.8548 www.neptunespeed.com+25 percent (319hp) Mix In * Power FC ECU upgrade (A'PEXi) * Air intake (Pettit Racing, A'PEXi, HKS) * Downpipe (HKS, A'PEXi) * Exhaust (GReddy, HKS, AutoEXE) * Stock-mount intercooler upgrade (GReddy, Pettit Racing, ARC) +50 percent (382hp) Preserve ECU, intake, downpipe, exhaust Mix In * 720cc primary injectors (RC Engineering, HKS) * 1,000cc secondary injectors (RC Engineering, HKS) * High flow fuel pump * Street port * '99-spec Turbo upgrade * Front-mount intercooler (GReddy, A'PEXi, HKS, ARC) +75 percent (446hp) Preserve ECU upgrade, intake, downpipe, exhaust, primary injectors, secondary injectors, fuel pump, intercooler Mix In * Wild race port * Single-turbo upgrade (A'PEXi, HKS, Garrett) * Upgraded dual oil-coolers (Earl's, HKS) +100 percent (502hp) Preserve ECU, intake, downpipe, exhaust, primary injectors, secondary injectors, fuel pump, intercooler, oil-coolers Mix In * Giant turbo upgrade (A'PEXi, HKS, Garrett) * Bridgeport * 6mm apex seals * Cryo-treated housing * Dry sump |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:54 | |
| Mitsubushi Recipe For Power Engine 4G63 Stock Horsepower 276hp Chef HKS USA 602.470.0065 www.hasport.com+25 percent (345hp) Mix In * Hi-Power exhaust (HKS) * Super Mega Flow Reloaded intake kit (HKS) * Downpipe (HKS) * EVC electronic boost controller (HKS) * Blow-off valve (HKS) +50 percent (414hp) Preserve exhaust, intake kit, downpipe, boost controller Mix In * GT2838 ball-bearing turbo kit (HKS) * Larger injectors (HKS) * F-CON iS engine management (HKS) * Twin Power ignition (HKS) * Super Fire spark plugs (HKS) * Fuel rail (HKS) * Fuel pump (HKS) +75 percent (483hp) Preserve exhaust, intake, downpipe, boost controller, turbo, injectors Mix In * Larger camshafts * Cam gears (HKS) * F-CON V Pro engine management (HKS) * Stroker kit (HKS) * GD Max twin-plate clutch (HKS) +100 percent (552hp) Preserve exhaust, intake, downpipe, boost controller, injectors Mix In * GT3037S ball-bearing turbo kit (HKS) * Type-R intercooler (HKS) Chef Evasive Motorsports 909.468.5552 www.evasivemotorsports.com+25 percent (345hp) Mix In * Air intake (ARC)* Downpipe (ARC)* Exhaust (ARC)* Blow-off valve (HKS)* Boost controller (HKS) +50 percent (414hp) Preserve intake, downpipe, exhaust, blow-off valve, boost controller Mix In * Test pipe * ECU re-flash (SP Engineering)* 255lph high-flow fuel pump (Walbro) * Fuel pressure regulator (SARD) +75 percent (483hp) Preserve intake, downpipe, exhaust, blow-off valve, boost controller, test pipe, ECU, fuel pump, fuel pressure regulator Mix In * 750cc injectors * GT3037 ball-bearing turbo kit (HKS)* 272-degree duration camshafts intake and exhaust (HKS) * Front-mount intercooler (Blitz) * Head gasket (HKS, GReddy)* Head studs (ARP) * Spark plugs (NGK) * Twin Power ignition upgrade (HKS) +100 percent (552hp) Preserve intake, downpipe, exhaust, blow-off valve, boost controller, test pipe, fuel pump, fuel pressure regulator, head studs, head gasket, spark plugs, ignition Mix In * 850cc injectors * F-CON V Pro engine management (HKS) * GT3240 ball-bearing turbo kit (HKS) * 280-degree duration camshafts intake and exhaust (HKS) * Type-R intercooler (HKS) * Kansai intake manifold (HKS) * 80mm throttle body |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:56 | |
| Subaru Recipe For Power Engine EJ20 Stock Horsepower 224hp Chef Crawford Performance 760.631.2927 www.crawfordperformance.com+25 percent (280hp) Mix In * Cat-less downpipe (Bosal)* Air/oil separator (Crawford Performance)* 3-inch cat-less up-pipe (Crawford Performance)* 3-inch after-cat exhaust (Crawford Performance)* Front-mount intercooler (Crawford Performance)* Cold-air intake (Crawford Performance)* ECU tuning on 91-octane gas (I-Speed USA) +50 percent (336hp) Preserve downpipe, air/oil separator, up-pipe, exhaust, intercooler, intake, ECU Mix In * 255lbh high-flow fuel pump (Walbro)* VF34 turbo upgrade (IHI) * Inlet hose (Samco) +75 percent (392hp) Preserve air/oil separator, cup-pipe, exhaust, intercooler, intake, ECU, fuel pump, inlet hose Mix In * Aluminum radiator (Koyo)* 2.5L short block with fully forged internals (Crawford Performance) * 630cc injectors (Crawford Performance) * CP32 turbo kit with downpipe (Crawford Performance) * Street Max clutch (Crawford Performance) +100 percent (448hp) Preserve air/oil separator, up-pipe, exhaust, intercooler, intake, ECU, fuel pump, inlet hose, radiator, injectors, short block, turbo, clutch Mix In * Stage 2 heads and cams (Crawford Performance) Chef XS Engineering 714.554.7474 www.xs-engineering.com+25 percent (280hp) Mix In * N1 after-cat exhaust (A'PEXi) * 3-inch downpipe (XS Engineering) * IHI VF23 turbo upgrade (XS Engineering) * Re-flash ECU tuning (XS Engineering) * Cold-air intake (XS Engineering) * Front-mount intercooler (XS Engineering) * 520cc injectors (Denso) * 255lbh high-flow fuel pump (Walbro) +50 percent (336hp) Preserve exhaust, downpipe, ECU, intake, intercooler, fuel pump Mix In * 680cc injectors (Denso) * IHI VF24 turbo upgrade (XS Engineering) * M2 camshafts (Cosworth) * Short block with forged internals, STI crankshaft in 2.0L or 2.2L stroker, 2.5L OEM short block, or 81mm stroker crankshaft in 2.5L for 2.6L stroker (Cosworth) * Oil pump (Cosworth) +75 percent (392hp) Preserve exhaust, downpipe, intake, intercooler, fuel pump, injectors, camshafts, built short block with forged internals, oil pump Mix In * GT-RS Turbo upgrade (HKS) * F-CON V Pro engine management (HKS)* Hand ported and polished heads (XS Engineering) +100 percent (448hp) Preserve exhaust, downpipe, intake, intercooler, fuel pump, injectors, camshafts, built short block, oil pump, engine management, hand ported and polished heads Mix In * Garrett GT30/GT35 hybrid turbo upgrade (XS Engineering) |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:57 | |
| Toyota Recipe For Power Engine 2JZ-GTE Stock Horsepower 224hp Chef SP Engineering 626.333.5398 www.sp-power.com+25 percent (400) Mix In * Intake * Blow-off valve* Exhaust * Downpipe* Boost controller* Boost cut controller +50 percent (480hp) Preserve intake, blow-off valve, exhaust, downpipe, boost controller, boost cut controller Mix In * Mid-pipe * Rom-tune or VPC (HKS) * Intercooler kit * BCPR7ES Spark plugs (NGK) +75 percent (560hp) Preserve intake, blow-off valve, exhaust, downpipe, boost controller, boost cut controller, mid-pipe, Rom-tune or VPC, intercooler kit, spark plugs Mix In * Single-turbo upgrade +100 percent (640hp) Preserve intake, blow-off valve, exhaust, downpipe, boost controller, boost cut controller, mid-pipe, Rom-tune or VPC, intercooler, spark plugs Mix In * F-CON V Pro engine management (HKS)* 2835 twin- or T04Z single-turbo upgrade (HKS)* 700cc injectors * Fuel system* Clutch upgrade Chef Twins Turbo 562.988.0617 www.twinsturbo.com+25 percent (400hp) Mix In * Intake (K&N)* Blow-off valve (TiAL)* Exhaust (Twins Turbo)* Downpipe (Twins Turbo)* Boost controller (World Racing) +235 percent (750hp) Preserve intake, blow-off valve, exhaust, downpipe, boost controller, boost cut controller Mix In * Front-mount intercooler* Engine management (AEM, MoTeC) * Camshafts (Brian Crower) * Valves (R.E.V.)* Valvesprings (R.E.V.)* Retainers (R.E.V.) * Head studs (ARP)* 750cc injectors * High-flow fuel pump (Aeromotive) * Fuel pressure regulator (Aeromotive, Weldon) * Twin- or single-turbo upgrade (Twins Turbo, Innovative Turbo) * Intake manifold (Twins Turbo, Fab Works) * Throttle body (Accufab) * Custom swirl pot cooling system (Twins Turbo) +300 percent (960hp) Preserve intake, intake manifold, blow-off valve, exhaust, downpipe, boost controller, boost cut controller, intercooler, engine management, camshafts, valves, valvesprings, retainers, head studs, fuel pump, fuel pressure regulator, turbo upgrade, throttle body, cooling system Mix In * 1,000cc injectors* More boost pressure* Connecting rods (Carillo, Brian Crower)* Forged pistons (Arias, CP) +350 percent (1,120hp) Preserve intake, valve, exhaust, downpipe, boost controller, boost cut controller, intercooler, engine management, camshafts, valves, valvesprings, retainers, fuel pump, fuel pressure regulator, intake manifold, throttle body, cooling system Mix In * Billet crankshaft* Bigger head studs (ARP)* 1,600cc injectors* Bigger turbo (Twins Turbo, Innovative Turbo) |
|  | | Rookie 2000 RPM


 Number of posts: 1745 Age: 63 Location: West to the JR! Registration date: 2006-10-17
My Garage Ride: Dub Streetstarr Civic Image!: Bling Ride! My Satisfaction Level:
   (1000000/1000000)
 | Subject: Re: Engine tuning by Rikkaddy Sun Oct 14 2007, 10:58 | |
| Scion Recipe For Power Engine 2AZ-FE Stock Horsepower 161hp Chef Jotech Motorsport 972.278.9744 www.jotechracing.com+25 percent (201) Mix In * Cold-air intake (AEM, Injen) * Header (DC Sports, Strup) * Exhaust (GReddy)* Header downpipe* Ported and polished head* Camshafts (Web) +50 percent (241hp) Preserve exhaust, ported and polished head, camshafts Mix In * Bolt-on turbo kit with 6-7psi of boost (GReddy, Turbonetics) +75 percent (281hp) Preserve exhaust, ported and polished head, camshafts, turbo kit Mix In * Boost controller (GReddy, HKS) * A/F Uego gauge (AEM) +100 percent (322hp) Preserve exhaust, ported and polished head, camshafts, turbo kit, boost controller, A/F gauge Mix In * Engine management (Unichip, GReddy) * 440cc or 550cc injectors (Precision)* High-flow fuel pump (Walbro)* Custom return fuel system* Colder spark plugs (NGK) GM/Chevy Recipe For Power Engine ECOtec/LSJ Stock Horsepower 173hp Chef Ken's Cobalt SS www.kenscobaltss.com+25 percent (216hp) Mix In * Air intake (Injen)* Performance honed exhaust manifold (GM)* Sport after-cat exhaust (GM)* Stage 2 2.8-inch pulley (GM)* ECU re-flash (HP Tuner) +50 percent (259hp) Preserve intake, manifold, exhaust, pulley, ECU Mix In * Progressive methanol injection* Colder spark plugs* Billet flywheel +75 percent (302hp) Preserve intake, manifold, exhaust, pulley, ECU, methanol injection, spark plugs, billet flywheel Mix in * Drive by wire 50 shot nitrous (NOS) +100 percent (346hp) Preserve intake, manifold, exhaust, pulley, ECU, methanol injection, spark plugs, flywheel Mix in * Forged pistons* Camshafts* Valvesprings* Adjustable cam gears (GM)* Exhaust porting* Shorty header* Nitrous 75 shot (NOS)* Source |
|  | | | | Engine tuning by Rikkaddy | |
|
| Page 1 of 1 |
| | Permissions of this forum: | You cannot reply to topics in this forum
| |
| |
| |